FR Wooden Braked Slate Waggon, Outside Bearing, A Type (16mm)

£25.00

One-Piece Resin body with resin axleboxes suitable for Slaters Wheelsets.

1 in stock

SKU: 16FRA23 Category: Tags: ,

A typical wooden wagon of the victorian period, with wooden slat sides spaced apart by cast iron bobbins. There were detail variations in the fleet of course, some having outside bearings and some inside, some braked, some not and of course differences in exact patterns of strapping etc. This wagon features a plain type of strapping similar to the preserved No. 79, and a drawbar for D shackle couplings. Full 4 Wheel band brakes are provided, and there is a separately fitted brake handle.

About the kits:
  • Type ‘A’  Wagons are ‘Body with Buffer’. These feature a one-piece main bodyshell, designed to be used with Coast Line Axleboxes. The axleboxes are retained by crossdrilling through the pilot holes in the solebar 1mm and gluing in retaining pins with dummy nut or bolt heads. Coupling Hooks are usually attached by a wire link to the buffer/coupler or drawbar printed as part of the main body. Couplings must be purchased separately, but axleboxes are included.
  • Type 'C'  Wagons are 'Complete with Couplings'. As type A, but the coupling hook and link is integral with the body print. For wooden wagons, the couplings are included as separate resin prints. Couplings are printed in a Tougher resin than the body and axleboxes.
Tools required for assembly:
  • A 1.05mm drill bit in pin chuck is required for crossdrilling the axlebox pin holes
Weight 50 g
Dimensions 150 × 55 × 55 mm
Railway Company

Builder

Product Type

3D Print Kit

Material

Acrylate Resin

Gauge

32mm

Scale

You may also like…