Croesor Tramway Iron Open Wagon, C Type (16mm)

£46.00

One-Piece Polyamide body with resin axleboxes suitable for Slaters Wheelsets.

1 in stock

This is a representation based on one of the surviving wagons that were used by the FR in the 60s as permanent way stock. Following the same build principles as FR Iron stock, this wagon is incredibly easy to assemble, even though the axleboxes are hollow - just like the prototype!

This kit includes detail options allowing the axleboxes to be modelled with or without their grease caps, and securing pins representing hex or square nuts. This allows modelling the wagons throughout their lifespan.

About the kits:
  • Type ‘A’  Wagons are ‘Body with Buffer’. These feature a one-piece main bodyshell, designed to be used with Coast Line Axleboxes. The axleboxes are retained by crossdrilling through the pilot holes in the solebar 1mm and gluing in retaining pins with dummy nut or bolt heads. Coupling Hooks are usually attached by a wire link to the buffer/coupler or drawbar printed as part of the main body. Couplings must be purchased separately, but axleboxes are included.
  • Type ‘B’  Wagons are ‘Body Only’. These feature a one-piece main bodyshell, designed to be used with Coast Line  Axleboxes and separate Cast Metal Buffer/Coupling units. They require only simple assembly, the axleboxes are retained by crossdrilling through the pilot holes in the solebar 1mm and gluing in retaining pins with dummy nut or bolt heads. The couplings are normally retained by a 16 or 14BA bolt through the tail of the coupling, locking it to the wagon ‘spine’. Some are bolted to the headstock, and others use D link shackles which may be closed by bolt or pin. Couplings must be purchased separately, but axleboxes are included.
  • Type 'C'  Wagons are 'Complete with Couplings'. On Iron Wagons the couplings are normally printed integral with the wagon body, no assembly being required.
Tools required for assembly:
  • A 1.05mm drill bit in pin chuck is required for crossdrilling the axlebox pin holes
Additional Materials Required:
  • 0.6 - 0.8mm wire or suitably sized jump rings for horse-rings
  • Slaters FR Web Spoke Wheeels

 

Weight 50 g
Dimensions 150 × 55 × 55 mm
Railway Company

,

Product Type

3D Print Kit

Material

Acrylate Resin, Polyamide (Nylon)

Gauge

32mm

Scale