
FR Wooden Braked Slate Waggon, Outside Bearing, A Type No.137 (16mm)
£23.00
One-Piece Resin body with separate resin axleboxes suitable for Slaters Wheelsets.
1 in stock
A typical wooden wagon of the victorian period, with wooden slat sides spaced apart by cast iron bobbins. There were detail variations in the fleet of course, some having outside bearings and some inside, some braked, some not and of course differences in exact patterns of strapping etc. This wagon features a more ornate set of features modelled on the current No.137, reversed corners to the axlebox pedestal blocks and end strapping, and a drawbar for Hook and Link couplings. To further enhance your model, a set of 4 slot wheel centres for slaters axles and tyres is available separately.
About the kits:
- Type ‘A’ Wagons are ‘Body with Buffer’. These feature a one-piece main bodyshell, designed to be used with Coast Line Axleboxes. The axleboxes are retained by crossdrilling through the pilot holes in the solebar 1mm and gluing in retaining pins with dummy nut or bolt heads. Coupling Hooks are usually attached by a wire link to the buffer/coupler or drawbar printed as part of the main body. Couplings must be purchased separately, but axleboxes are included.
- Type 'C' Wagons are 'Complete with Couplings'. As type A, but the coupling hook and link is integral with the body print. For wooden wagons, the couplings are included as separate resin prints. Couplings are printed in a Tougher resin than the body and axleboxes.
Tools required for assembly:
- A 1.05mm drill bit in pin chuck is required for crossdrilling the axlebox pin holes
| Weight | 50 g |
|---|---|
| Dimensions | 150 × 55 × 55 mm |
| Railway Company | |
| Builder | |
| Product Type | 3D Print Kit |
| Material | Acrylate Resin |
| Gauge | 32mm |
| Scale |









