Welcome to 2025!

Hello and Happy New Year to you all! I'm a little bit late writing this as with all things Christmas time it has been a very busy few weeks. I am now back processing orders, the first ones of 2025 have in fact already gone and should be with their new owners already - the daily grind continues!

I have a few ideas, plans and such for this year and I thought I'd think out loud with you here as a first post for the year. Firstly, there will be a little part number jiggery pokery with the 16mm wagon range. Currently they are describes as B and C types, which loosely translates as without couplings and with couplings. Unfortunately with the different kinds of wagons I've created over the years, the distinction has got a little confused. Historically, the first 16mm printed wagon I designed (FR 2 Ton, unbraked) featured the buffer and coupling tail, but not the hook and chain link. This was the A type. It was superseded by the B type, which had no buffer or coupling tails, these being added from Brass castings; The C type was a later variant again with the couplings printed integrally with the body. This all worked well when it was only the Shapeways marketplace and the wagons were all Iron bodied to the same pattern, but now with wooden wagons too and no more Shapeways marketplace it has got confused.

So what am I doing? Well firstly wooden wagons currently branded as type B will be recategorised as A, because they have integral drawbars they better match that category as outlined above. New Iron wagons are likely to all be type A as well, so that the buyer has a choice of prototypical couplings available to them until such time as I'm able to bring Coast Line ones back into production. I am still hopeful that Type C wagons can make a comeback, but experiments and test prints so far haven't been up to the standards I'd like to see as a benchmark.

More exciting than that even, I am considering offering wagons RTR. Not mass produced in the Hornby et al fashion, but assembled and painted by me in a basic livery and ready to roll. I've already reached out to Tom Foster to become my official weathering partner should this get off the ground, so watch this space for developments here. It does all somewhat hinge on sorting out reliable supply chain for the kits as a starting point, but I am optimistic that by the summer I should be able to offer a few off the shelf. Famous last words!

I'm very aware of the fact that much of the old range is still unavailable, and I am working on reintroducing it slowly. Before the hiatus, there were new models in the pipeline and I'm hoping that they will get finished at some stage too this year. Once everything is finished, and all the old designs are reintroduced, the range will look something like this:

FR01 – FR 2-Ton Iron Slate Waggon, Unbraked

FR02 – LNWR Iron Slate Waggon, Unbraked

FR03 – FR Wooden Slate Waggon, Unbraked, Outside Bearing

FR04 – FR Long Slab waggon

FR05 – FR Wooden Bolster waggon

FR06 – Oakeley Quarry Gunpowder Van

FR07 – FR Short Slab waggon

FR08 – FR Iron Bolster waggon

FR09 – LNWR Coal waggon

FR10 – Maenofferen Tank waggon

FR11 – FR 2-Ton Slate Waggon, Rail Spine, Unbraked

FR12 – FR Wooden Slate Waggon, Unbraked, Inside Bearing

FR13 – FR 3-Ton Iron Slate waggon, Brown Marshall 2nd Generation, Unbraked

FR14 – FR 2-Ton Iron Slate Waggon, Braked

FR15 – FR Granite waggon, Brown Marshall 2nd Generation, Unbraked

FR16 – FR Wooden Slate Waggon – No. 220

FR17 – FR 3-Ton Iron Slate Waggon, Brown Marshall 2nd Generation, Unbraked, Sprung Buffer

FR18 – FR 3-Ton Iron Slate Waggon, Boston Lodge, Unbraked, Sprung Buffer

FR19 – FR Granite waggon, Brown Marshall 2nd Generation, Unbraked, Sprung Buffer

FR20 - FR Granite waggon, Boston Lodge, Unbraked

FR21 - FR 3-Ton Iron Slate Waggon, Brown Marshall 1st Generation, Unbraked

FR22 - FR Granite Waggon, Brown Marhsall 1st Generation, Unbraked, Iron Sheeting

FR23 – FR Wooden Slate Waggon, Braked, Outside Bearing

FR24 – FR Granite Tipping Waggon No. 848

FR25 – FR 2-Ton Iron Slate Waggon, Ratchet Braked

FR26 – FR 2-Ton Iron Slate Waggon, Brown Marshall, Braked

FR27 – FR Iron Horse Dandy

FR28 – FR Wooden Slate Waggon No.137

Please do let me know which you'd like to see prioritised, although I o know already that the Maenofferen tank wagon is a firm favourite, and I hope that it can be reintroduced soon.

Still in 16mm but moving over to locomotives, I hope this year to bring out the Quarry Hunslet Type C conversion kit for the Slaters 'Rough Pup' Model. This comprises new frames and footplate to enable the building of 'Bernstein' or 'Covertcoat' and will sit alongside the already released 'Type B' conversion kit. I intend to work on additional Hunslet parts as well to enable the later type Bs to be modelled too - so Square corner bunkers and maybe even a cab, although I don't expect the actual products to be out this year.

In 7mm scale, work is progressing on some more quarry wagons - I am currently working on some Ffestiniog area wagons following a request, and with luck we should see something in that vein a little later on in the year. The initial flurry of activity around the Bachmann Husnlets has died back, so detail parts have been very much on the back burner - so please do get in touch if you are interested in parts for these, or there they shall remain!

So there you go - there's a lot of ifs and maybe's still, but rest assured I am not sitting still, and I think 2025 is going to be a good year here at Coast Line Models!

Share This Post
Alan Jones
Alan Jones
Articles: 44