
An Overdue Update
Hello all. It's been nearly 2 years since I posted about closing temporarily, and that temporary has I'm sure started to seem very permanent! However I am now making steps towards restarting operations in a limited way.
Firstly and most importantly, Claire is on the mend. Chemotherapy followed by surgery, radiotherapy and then yet more Chemo has of course been an awful ride; and there is still some more surgery to come in the future. But, things are improving every day and that's what matters. In these 2 years as health and time have allowed we've managed to acquire his and hers tractors for the farm, reduced the horse collection to four and gained a Bengal cat named Ptepic.

Now modelling wise, I've naturally not been able to do a lot, but I have kept abreast of developments. There are 2 'biggies' which affect things here: Shapeways going bust and Bachmann releasing NG7 Quarry Hunslets!
Lets start with the bad news - Shapeways. I relied on Shapeways as a source for my cast couplings for 16mm rollings stock as well as other detailing. It wasn't cheap, but it was the best in the business. Likewise, many of the Iron waggons had bodies printed in SLS Nylon (Shapeways' Versatile plastic) and whilst there are many alternative suppliers for this, I haven't found anyone as consistently good with the waggons as Shapeways' Eindhoven factory were, even if it cost a little bit extra. So for the time being, 16mm Modelling output is going to be a bit limited whilst I explore other avenues.
Now the good news, ish - Bachmann's Quarry Hunslets. I already rushed out and bought the 009 ones for sentimental reasons: I was originally a 009 modeller, and I am of ocurse a Quarry Hunslet Nut. I was stunned when they announced the NG7 range, although I am not as impressed with the product compared to the 009 versions (Review forthcoming!), they do pose an opportunity to get my teeth into some new ground. I had previously made the move to 7mm for Standard Gauge modelling, and whilst I don't expect NG7 to replace SM32, I do expect to be doing a fair bit of work in this area, so stay tuned!

Now then - practical matters. During my absence, something went base over apex with the shop section of the website - twice in fact - and I've had to start again with it. Quite what went wrong I do not know, since the blog subsection and the main homepage which both run the exact same software were unharmed. At any rate, you will have noticed it is in Maintenance mode, and once I've finished a little rebranding and tidying up it will reappear with a limited range whoch I hope to expand as free time and Claire's recovery allow.
