
3D Printed FR Wagons - Soon to be Stocked (16mm Scale)
The eagle eyed amongst you will have seen the new products listed in the store as out of stock, and I can reveal that, yes, I am going to start selling FR Rolling stock from stock. The format is essentially the same as the models available from the Shapeways shop. FRB series wagons comprise a one piece body, to which you add axleboxes, axlebox securing pins, Slater's Wheels and couplings of your choice (Scale cast metal ones are available via Shapeways) and FRC are the same, but the scale couplings are included as part of the one piece body. These are incredibly simple to assemble - press a wheel bearing into the axlebox, op the axleboxes onto the axle ends and then locate them in the pockets on the underside of the wagon. With a little luck it will now roll smoothly, but if not all that is required normally is a gentle fettling of the axlebox to allow some wiggle room in the pocket. Once rolling, simply drill out the holes for the securing pins and glue the pins in - trapping the axleboxes in place. It has taken me as long to type this out as it has to build a wagon, they are that easy.
Not only are they easy to build, but they are fully featured. Every rivet, nut and bolt is captured, above and below the floor. The braked 2 Ton Wagon is a great example of this, with all the brake gear fully modelled. FR wagons come with a choice of axlebox covering plain bearings with or without FR lettering, Split axlebox and axleboxes with grease caps missing.
The initial range is to comprise of:
FRC01 - Standard 2 Ton Iron Slate Wagon (Unbraked)
FRC02 - LNWR 2 Ton Iron Slate Wagon (Unbraked)
FRC11 - 2 Ton Slate Wagon with double headed rail spine
FRC13 - 3 Ton Iron Slate Wagon (Brown Marshall Type)
FRC14 - Standard 2 Ton Iron Slate Wagon (Braked)
<< Click here to go to the range >>
Stock is expected mid July - initial demand is expected to be high, so if you are thinking of buying in bulk, please get in touch so I can ensure I have enough stock.
Below are some photos from the initial prototypes for the range.





